Proffieboard light

[LyleStyle]

I think we just talked about that one.

Help with the Proffieboard v2.2

I’m looking at this It is not an LED star, like a tri-cree (if that’s what you mean). You can still use the V2.2 configurator as a guide. Where the strip is reprsented there are 3 wires: The red wire goes to the + pads on the connector, closest to the edge. The black wire goes t othe - pads on the connector, closer to the center. The pink wire goes to the D2 pad. I see two resitors on the connector, but only one D pad. This suggests that the LEDs on the surface of the connectore are wired in parallel with the blade data. One blade style should be enough for each preset.

The configuration tool will help.

https://fredrik.hubbe.net/lightsaber/v5/