Error Compiling for Board Proffieboard V2

22

Ok, thank you! I’m getting this by pressing the buttons a few times:

EVENT: Power-Pressed#1 millis=2262346
EVENT: Power-Pressed millis=2262346
Motion chip … I2C init…
105 found.
EVENT: Swing mods Power millis=2262362
EVENT: Power-Released#1 millis=2262550
EVENT: Power-Released millis=2262550
EVENT: Power-Shortclick#1 millis=2262550
EVENT: Power-Shortclick millis=2262550
Ignition.
unit = 0 vol = 0.00, No sounds found: hum
No sounds found: hum
Audio underflows: 1
Amplifier off.
EVENT: Aux-Pressed#1 ON millis=2265384
EVENT: Aux-Pressed ON millis=2265384
EVENT: Aux-Released#1 ON millis=2265568
EVENT: Aux-Released ON millis=2265568
EVENT: Aux-Shortclick#1 ON millis=2265568
EVENT: Aux-Shortclick ON millis=2265568
unit = 1 vol = 0.50, No sounds found: blaster
No sounds found: hum
Audio underflows: 1
Amplifier off.
EVENT: Power-Pressed#1 ON millis=2277241
EVENT: Power-Pressed ON millis=2277241
EVENT: Power-Released#1 ON millis=2277393
EVENT: Power-Released ON millis=2277393
EVENT: Power-Shortclick#1 ON millis=2277393
Unmounting SD Card.
Booster off.
Battery voltage: 0.18
EVENT: Aux-Pressed#1 millis=2283507
EVENT: Aux-Pressed millis=2283507
EVENT: Aux-Released#1 millis=2283748
EVENT: Aux-Released millis=2283748
EVENT: Aux-Shortclick#1 millis=2283748
EVENT: Aux-Shortclick millis=2283748
Style RAM = 800
Style RAM = 348
Scanning sound font: FlexAwakensTFU done
Scanning sound font: common done
Activating polyphonic font.
DISPLAY: Preset: 2
Amplifier off.
Unmounting SD Card.
Booster off.

23

So this says that it’s not finding any of the sounds, which would mean that the font paths in your presets don’t match what is on your SD card in some way.

You can use the pwd command to see the currently active font paths. The effects command will tell you what files it actually did find. dir will show you the directories on the SD card.

If it’s not saying “font directory not found”, I suspect that you have a directory called “fontname” but the actual files for the font are in “fontname/fontname/hum.wav” or something like that…

24

So I swapped the SD card for a new one and that did the trick. Think maybe the older one got scratched.

BUT THANK YOU SO MUCH FOR ALL YOUR TIME AND HELP!

25

A post was split to a new topic: Error Compiling