Using Edit Mode Only for Settings

[Fett263]

I would read this BEFORE using KEEP_SAVEFILES_WHEN_PROGRAMMING as it will still impact updates you may make to the config as all of the .ini files are still updated when Edit Settings is active. In general, this define should only be used if you never intend to change anything via uploading the config going forward. If you use this define then you need to be aware that changes in your config may not be reflected, particularly adding or removing presets, changing the order of presets, fonts, tracks, etc. as well as changes to gestures and certain control features. In general, I do not recommend using this define ever.

OS6 & OS7 PSA - Using #define KEEP SAVEFILES WHEN PROGRAMMING

NOTE FOR ALL USERS updating to OS6 or OS7. Be sure to read the wiki page for this define before adding to your config. #define KEEP_SAVEFILES_WHEN_PROGRAMMING Once this define is added to your config, the intended use is to make all future updates to your saber via Edit Mode or ProffieOS Workbench and NOT by uploading changes to your config. This define tells the OS to use the .ini files on your SD for all presets and settings so if you have new styles, changes to fonts, colors, etc. or changes to volume, clash threshold, brightness, blade length or other settings that are editable in Edit Mode or ProffieOS Workbench that you’re trying to make via a change to your config you will not see those changes on your saber if the .ini files have different values. This can be confusing, particularly for new users, as you may have a successful upload but not see the changes on your saber. You also have to be mindful when adding, removing or updating presets in your config once this define is enabled (refer to below wiki article). I recommend only adding this define AFTER you have your saber dialed in to where you want it with all styles and settings for your “baseline” set. Then once you add this define, all future changes should only be made via Edit Mode or ProffieOS Workbench. If you need to add a style or upload other changes via your config, you should remove or comment out this define first and then only add it once you have the saber’s default set.