Error after installing proffie OS

After I upload to my board it goes through the prodded, gets to 100% then says this
“Download done”
“File downloaded successfully”
“Error during download get_status”
“Error during download get_status”

I think that’s fine.
I think the dfu tool is trying to verify that the board rebooted properly, but it doesn’t always wait long enough. Arduino sometimes gets confused this way too, in which case you have to re-select the port and/or unplug/re-plug the board. The actual programming worked though, it’s just the reboot and recognizing the board again afterwards that sometimes has issues.