I have a BT module connected via 3.3V pad and LED1.
this is the blade definition I use to power it:
SimpleBladePtr<CH1LED, NoLED, NoLED, NoLED, bladePowerPin1, -1, -1, -1>(), //bluetooth module
A blade style is also needed–I include this in each preset:
StylePtr<White>(), //blue tooth
If you’re using a different LED pad, you’d need to change the bladePowerPin in the blade definition–but otherwise, this should work for you.
When attaching the capacitor–you need to be careful to not bridge the pads–and the type of capacitor matters. The Tantalum capacitors are directional and I’ve read recommendations to NOT use them for this…
The biggest issues I’ve had with Bluetooth have been my weak soldering skills and poor eyesight–getting the wires soldered correctly to the BT module has been challenging. Good luck and MTFBWY.