# \#issue **URL:** https://crucible.hubbe.net/tag/issue/9.md [Latest](https://crucible.hubbe.net/latest.md) · [Categories](https://crucible.hubbe.net/categories.md) · [Tags](https://crucible.hubbe.net/tags.md) --- ## [Proffieboard v2.2 Overheating issues on the STM32 chip](https://crucible.hubbe.net/t/proffieboard-v2-2-overheating-issues-on-the-stm32-chip/8266)
**Author:** [@Kajesan](https://crucible.hubbe.net/u/Kajesan)\ **Replies:** 5\ **Last updated:** [October 24, 2026, 11:43pm UTC](https://crucible.hubbe.net/t/proffieboard-v2-2-overheating-issues-on-the-stm32-chip/8266 "2026-10-24T23:43:48Z")
Hello, looking for some advice or feedback regarding diagnosing an issue I’ve had with a second hand proffieboard I picked up some years ago. the Saber was given to me with a know… --- ## [V2.2 with out charging port](https://crucible.hubbe.net/t/v2-2-with-out-charging-port/8257)
**Author:** [@aiber](https://crucible.hubbe.net/u/aiber)\ **Replies:** 1\ **Last updated:** [October 20, 2026, 6:06pm UTC](https://crucible.hubbe.net/t/v2-2-with-out-charging-port/8257 "2026-10-20T18:06:41Z")
Is there a way to get the image of the welding of the V2.2 put without a charging?? port in the v3.9 it lets me take out but not in the v2 --- ## [ServoBlade Feature Request](https://crucible.hubbe.net/t/servoblade-feature-request/8229)
**Author:** [@Ingyare](https://crucible.hubbe.net/u/Ingyare)\ **Replies:** 5\ **Last updated:** [September 28, 2026, 10:12pm UTC](https://crucible.hubbe.net/t/servoblade-feature-request/8229 "2026-09-28T22:12:16Z")
I’m having a problem with servoblade where because my servos are being fed a constant PWM signal, they are constantly straining to perfectly center themselves. this means the sligh… --- ## [Popping and slight distortion/buzzing on cfx](https://crucible.hubbe.net/t/popping-and-slight-distortion-buzzing-on-cfx/8217)
**Author:** [@TrendingTab](https://crucible.hubbe.net/u/TrendingTab)\ **Replies:** 10\ **Last updated:** [September 24, 2026, 7:45pm UTC](https://crucible.hubbe.net/t/popping-and-slight-distortion-buzzing-on-cfx/8217 "2026-09-24T19:45:20Z")
On certain soundfonts, there is popping when an accent swing plays and like this deep bass distortion almost that plays for the entire swing (not just a pop before the swing plays,… --- ## [OmniColor and OmniColor Swing rainbow effects](https://crucible.hubbe.net/t/omnicolor-and-omnicolor-swing-rainbow-effects/8218)
**Author:** [@Dmagoku](https://crucible.hubbe.net/u/Dmagoku)\ **Replies:** 5\ **Last updated:** [September 22, 2026, 8:36pm UTC](https://crucible.hubbe.net/t/omnicolor-and-omnicolor-swing-rainbow-effects/8218 "2026-09-22T20:36:41Z")
Hi, Seems like the code generated here Fett263's ProffieOS7/8 Style Library - Public Access for “OmniColor” and “OmniColor Swing” is not working as shown in the videos. “Running … --- ## [Fett's Corruption phase on multiple blades](https://crucible.hubbe.net/t/fetts-corruption-phase-on-multiple-blades/8213)
**Author:** [@DrExtinct](https://crucible.hubbe.net/u/DrExtinct)\ **Replies:** 14\ **Last updated:** [September 20, 2026, 5:26pm UTC](https://crucible.hubbe.net/t/fetts-corruption-phase-on-multiple-blades/8213 "2026-09-20T17:26:08Z")
This is one for Fett directly unless anyone else knows, but i would like to use the Osha’s pull to darkness corruption phase change, however i have 3 blades on my kylo saber, how c… --- ## [Static popping?](https://crucible.hubbe.net/t/static-popping/8191)
**Author:** [@TrendingTab](https://crucible.hubbe.net/u/TrendingTab)\ **Replies:** 11\ **Last updated:** [September 9, 2026, 10:44pm UTC](https://crucible.hubbe.net/t/static-popping/8191 "2026-09-09T22:44:39Z")
I had 60 presets on my proffie 2.2 (os 7.15) and then I went to like 135. I flashed and everything was good (although I was at like 99% flash storage), but when I turned it on most… --- ## [Blade doesn't turn on until after ignition?](https://crucible.hubbe.net/t/blade-doesnt-turn-on-until-after-ignition/8192)
**Author:** [@TrendingTab](https://crucible.hubbe.net/u/TrendingTab)\ **Replies:** 4\ **Last updated:** [September 5, 2026, 3:35pm UTC](https://crucible.hubbe.net/t/blade-doesnt-turn-on-until-after-ignition/8192 "2026-09-05T15:35:05Z")
So a few fonts that I have (Orlando Dove fonts on YouTube) always make the blade turn on after the ignition sound plays, not along with it. Also, Most of them play the ignition sou… --- ## [Font Directory Not Found?](https://crucible.hubbe.net/t/font-directory-not-found/8176)
**Author:** [@raptor0192](https://crucible.hubbe.net/u/raptor0192)\ **Replies:** 12\ **Last updated:** [August 30, 2026, 9:54pm UTC](https://crucible.hubbe.net/t/font-directory-not-found/8176 "2026-08-30T21:54:21Z")
Hi! This is my first Proffie build (actually retrofitting an Electrum Sabercrafts saber of mine). I can’t seem to get past a problem where the board keeps telling me “Font Director… --- ## [Wav file distorted on one proffie board but not another](https://crucible.hubbe.net/t/wav-file-distorted-on-one-proffie-board-but-not-another/8174)
**Author:** [@Elysian](https://crucible.hubbe.net/u/Elysian)\ **Replies:** 5\ **Last updated:** [August 28, 2026, 10:24pm UTC](https://crucible.hubbe.net/t/wav-file-distorted-on-one-proffie-board-but-not-another/8174 "2026-08-28T22:24:25Z")
Hello, first post but I’ve been unable to find someone with a similar issue. I have a Sabertrio (S3) proffie 3.9 setup that uses their unique “audio chip” style speakers. I also … --- ## [SSD1306 portrait BMP byte-order bug in ProffieOS 8.10](https://crucible.hubbe.net/t/ssd1306-portrait-bmp-byte-order-bug-in-proffieos-8-10/8173)
**Author:** [@Dwight](https://crucible.hubbe.net/u/Dwight)\ **Replies:** 3\ **Last updated:** [August 28, 2026, 7:05am UTC](https://crucible.hubbe.net/t/ssd1306-portrait-bmp-byte-order-bug-in-proffieos-8-10/8173 "2026-08-28T07:05:10Z")
I’ve discovered an issue when creating a stacked BMP file to animate a kyber crystal on an OLED display. ProffieOS has a built-in image display function for each sound font on the … --- ## [Having a nightmare, need assistance. Error in Voice Pack Version + no customisation options on OS Builder](https://crucible.hubbe.net/t/having-a-nightmare-need-assistance-error-in-voice-pack-version-no-customisation-options-on-os-builder/8150)
**Author:** [@Demo](https://crucible.hubbe.net/u/Demo)\ **Replies:** 22\ **Last updated:** [August 27, 2026, 6:46pm UTC](https://crucible.hubbe.net/t/having-a-nightmare-need-assistance-error-in-voice-pack-version-no-customisation-options-on-os-builder/8150 "2026-08-27T18:46:38Z")
Hi all! I’ve spent about 10 hours now (continuously) trying to get this to work overall and seem to be drastically failing. One of my fonts won’t even appear? (Duskwarden). I have … --- ## [Blade glitching on presets added with OS workbench](https://crucible.hubbe.net/t/blade-glitching-on-presets-added-with-os-workbench/8164)
**Author:** [@TrendingTab](https://crucible.hubbe.net/u/TrendingTab)\ **Replies:** 1\ **Last updated:** [August 24, 2026, 5:40pm UTC](https://crucible.hubbe.net/t/blade-glitching-on-presets-added-with-os-workbench/8164 "2026-08-24T17:40:03Z")
On all the styles I added with OS workbench, the blade doesn’t turn on until after the out file has fully played and it doens’t turn off until the in file has fully played either. … --- ## [OLED on.bmp not displaying](https://crucible.hubbe.net/t/oled-on-bmp-not-displaying/8120)
**Author:** [@ChimeratechCorp](https://crucible.hubbe.net/u/ChimeratechCorp)\ **Replies:** 13\ **Last updated:** [August 21, 2026, 3:34am UTC](https://crucible.hubbe.net/t/oled-on-bmp-not-displaying/8120 "2026-08-21T03:34:37Z")
I installed OLED on my proffie v3.9. The boot.bmp and default battery display are working. But the on.bmp isn’t playing (crystal spin). It will continue to display the default batt… --- ## [How do i set up the font folder for Kyberphonic's Osha soundfont?](https://crucible.hubbe.net/t/how-do-i-set-up-the-font-folder-for-kyberphonics-osha-soundfont/8113)
**Author:** [@TrendingTab](https://crucible.hubbe.net/u/TrendingTab)\ **Replies:** 7\ **Last updated:** [August 10, 2026, 3:56pm UTC](https://crucible.hubbe.net/t/how-do-i-set-up-the-font-folder-for-kyberphonics-osha-soundfont/8113 "2026-08-10T15:56:55Z")
Do i just putt the folder titled “Fett263’s version” as “Osha” or do the “main” folder under that and include like alt001 --- ## [Battery while in os workbench?](https://crucible.hubbe.net/t/battery-while-in-os-workbench/8111)
**Author:** [@TrendingTab](https://crucible.hubbe.net/u/TrendingTab)\ **Replies:** 16\ **Last updated:** [August 9, 2026, 8:46pm UTC](https://crucible.hubbe.net/t/battery-while-in-os-workbench/8111 "2026-08-09T20:46:16Z")
Is a battery required or recommended for using os workbench? --- ## [Error messages as wavs](https://crucible.hubbe.net/t/error-messages-as-wavs/8068)
**Author:** [@NoSloppy](https://crucible.hubbe.net/u/NoSloppy)\ **Replies:** 5\ **Last updated:** [August 2, 2026, 8:39am UTC](https://crucible.hubbe.net/t/error-messages-as-wavs/8068 "2026-08-02T08:39:25Z")
It’s been a while since error wavs were introduced, but I am only getting around to testing it now. I found one minor issue, one major issue (freezing) and an overall suggestion f… --- ## [Where do i get audio que files for common folder?](https://crucible.hubbe.net/t/where-do-i-get-audio-que-files-for-common-folder/8075)
**Author:** [@TrendingTab](https://crucible.hubbe.net/u/TrendingTab)\ **Replies:** 5\ **Last updated:** [August 2, 2026, 6:39am UTC](https://crucible.hubbe.net/t/where-do-i-get-audio-que-files-for-common-folder/8075 "2026-08-02T06:39:54Z")
cant find them --- ## [Power and connection issues oh my!](https://crucible.hubbe.net/t/power-and-connection-issues-oh-my/8087)
**Author:** [@TimDRX](https://crucible.hubbe.net/u/TimDRX)\ **Replies:** 0\ **Last updated:** [August 1, 2026, 5:09pm UTC](https://crucible.hubbe.net/t/power-and-connection-issues-oh-my/8087 "2026-08-01T17:09:16Z")
Hello! The struggle continues. I’ve got novel issues popping up all the time now. Using a Proffieboard 3.9, I have an illuminated NPXL V4 and a pair of accent LEDs for a crystal ch… --- ## [Micro usb wont go in](https://crucible.hubbe.net/t/micro-usb-wont-go-in/8074)
**Author:** [@TrendingTab](https://crucible.hubbe.net/u/TrendingTab)\ **Replies:** 3\ **Last updated:** [July 31, 2026, 4:01am UTC](https://crucible.hubbe.net/t/micro-usb-wont-go-in/8074 "2026-07-31T04:01:44Z")
I removed the plastic shell, so there’s enough room, but it just wont go in --- ## [Can't get my crystal chamber accent lights working!](https://crucible.hubbe.net/t/cant-get-my-crystal-chamber-accent-lights-working/8059)
**Author:** [@TimDRX](https://crucible.hubbe.net/u/TimDRX)\ **Replies:** 4\ **Last updated:** [July 28, 2026, 8:22am UTC](https://crucible.hubbe.net/t/cant-get-my-crystal-chamber-accent-lights-working/8059 "2026-07-28T08:22:13Z")
Hey all, struggling with my first saber. I’ve got a NPXL V4 Hiltside Pixel Connector and two Neopixel Accent LED Single Pixels for a Crystal Chamber. I followed this wiring diagram… --- ## [Begin and end .wav files supported on Xenov3?](https://crucible.hubbe.net/t/begin-and-end-wav-files-supported-on-xenov3/8047)
**Author:** [@TrendingTab](https://crucible.hubbe.net/u/TrendingTab)\ **Replies:** 4\ **Last updated:** [July 27, 2026, 11:14am UTC](https://crucible.hubbe.net/t/begin-and-end-wav-files-supported-on-xenov3/8047 "2026-07-27T11:14:15Z")
I read something that said beginmelt, lock, drag, etc. weren’t supported on xenov3, along with spin files. However, I’ve heard before that they are and you can upload all of those … --- ## [How to plug into micro usb port for arduino?](https://crucible.hubbe.net/t/how-to-plug-into-micro-usb-port-for-arduino/8062)
**Author:** [@TrendingTab](https://crucible.hubbe.net/u/TrendingTab)\ **Replies:** 2\ **Last updated:** [July 25, 2026, 7:24pm UTC](https://crucible.hubbe.net/t/how-to-plug-into-micro-usb-port-for-arduino/8062 "2026-07-25T19:24:24Z")
That silver thing (the side of it the arrow is pointing to) is the microusb port. As you can see there isn’t enough to plug the cord in because of the plastic shell of the core. An… --- ## [Saber style lag on 1 font](https://crucible.hubbe.net/t/saber-style-lag-on-1-font/7975)
**Author:** [@DrExtinct](https://crucible.hubbe.net/u/DrExtinct)\ **Replies:** 20\ **Last updated:** [June 23, 2026, 11:45am UTC](https://crucible.hubbe.net/t/saber-style-lag-on-1-font/7975 "2026-06-23T11:45:54Z")
Hello, Need some assistance on this weird issue, I have 1 new font that lags, the audio seems fine just appears to be the actual blade style that is very laggy and slow. I’ve copy… --- ## [My 89 SabersQui Gon blade is barely any different to my baselit. Washed out colours and not matching what I see in reviews and images of this and other neopixel sabers](https://crucible.hubbe.net/t/my-89-sabersqui-gon-blade-is-barely-any-different-to-my-baselit-washed-out-colours-and-not-matching-what-i-see-in-reviews-and-images-of-this-and-other-neopixel-sabers/7935)
**Author:** [@zpalbarrows](https://crucible.hubbe.net/u/zpalbarrows)\ **Replies:** 3\ **Last updated:** [June 2, 2026, 3:00am UTC](https://crucible.hubbe.net/t/my-89-sabersqui-gon-blade-is-barely-any-different-to-my-baselit-washed-out-colours-and-not-matching-what-i-see-in-reviews-and-images-of-this-and-other-neopixel-sabers/7935 "2026-06-02T03:00:08Z")
My 89 SabersQui Gon blade is barely any different to my baselit. Washed out colours and not matching what I see in reviews and images of this and other neopixel sabers. I have not … --- ## [Converting my ultrasaber base lit to a neopixel](https://crucible.hubbe.net/t/converting-my-ultrasaber-base-lit-to-a-neopixel/7943)
**Author:** [@ItsHatty](https://crucible.hubbe.net/u/ItsHatty)\ **Replies:** 3\ **Last updated:** [June 1, 2026, 9:50pm UTC](https://crucible.hubbe.net/t/converting-my-ultrasaber-base-lit-to-a-neopixel/7943 "2026-06-01T21:50:01Z")
So I bought Cal Kestis’s saber from ultrasabers about 3 years ago as a part of my costume for Halloween. Recently my brother bought a neopixel blade and it has me a little bit jea… --- ## [Error message on arduino with bladestyle](https://crucible.hubbe.net/t/error-message-on-arduino-with-bladestyle/7927)
**Author:** [@Linkrules8](https://crucible.hubbe.net/u/Linkrules8)\ **Replies:** 5\ **Last updated:** [May 25, 2026, 5:27am UTC](https://crucible.hubbe.net/t/error-message-on-arduino-with-bladestyle/7927 "2026-05-25T05:27:36Z")
what is this error message and how do I fix it: In file included from C:\\Users\\linkr\\Downloads\\ProffieOS-v8.10\\ProffieOS\\ProffieOS.ino:673: C:\\Users\\linkr\\Downloads\\ProffieOS-v8.… --- ## [Help and questions with Fett263 blade style codes](https://crucible.hubbe.net/t/help-and-questions-with-fett263-blade-style-codes/7906)
**Author:** [@Linkrules8](https://crucible.hubbe.net/u/Linkrules8)\ **Replies:** 42\ **Last updated:** [May 18, 2026, 11:27pm UTC](https://crucible.hubbe.net/t/help-and-questions-with-fett263-blade-style-codes/7906 "2026-05-18T23:27:13Z")
I am trying to add bladestyles with 2 kyberphonic fonts being party mode for the party saber sound font from the survivor 2 bundle and pull to the darkness/corruption for the osha … --- ## [Quick help please](https://crucible.hubbe.net/t/quick-help-please/7895)
**Author:** [@Bobbyg104](https://crucible.hubbe.net/u/Bobbyg104)\ **Replies:** 4\ **Last updated:** [May 14, 2026, 8:41pm UTC](https://crucible.hubbe.net/t/quick-help-please/7895 "2026-05-14T20:41:43Z")
Hello. Just got my Proffie saber today and picking up on the coding pretty quickly. I was able to add a Fett blade source along with the Kyberphonics Vader font. Father V2. I got i… --- ## [Well, I think I killed my Proffie](https://crucible.hubbe.net/t/well-i-think-i-killed-my-proffie/7899)
**Author:** [@Bobbyg104](https://crucible.hubbe.net/u/Bobbyg104)\ **Replies:** 8\ **Last updated:** [May 14, 2026, 6:21pm UTC](https://crucible.hubbe.net/t/well-i-think-i-killed-my-proffie/7899 "2026-05-14T18:21:44Z")
Well I think I fried my Proffie like an idiot. Forgot I had the battery in the hilt and unplugged from my pc and it just “died”. Now there’s no led indicators for anything, pluggin… [Next page](https://crucible.hubbe.net/tag/issue/9.md?match_all_tags=true&page=1&tags%5B%5D=issue)