Looking for suggestions on solder stations

profezzorn · November 1, 2021, 6:24am

Here are the ones I have experience with:

I’ve had 5 soldering irons in my life. Two of those I wouldn’t recommend to anybody… The first I don’t remember when or where I got my first soldering iron, but it was a 25 watts, not temperature controlled and it looked a lot like this: A 25w iron works just fine if you’re soldering wires together, but it takes a while to heat up, and the tip was terrible. The second The second was a 40w “soldering gun”, something like this: It heated up a lot faster, but it’s still not temperature controlled, so if you keep holding the button down, it gets really really hot, which melts your cable coating unless it’s made from silicone or teflon. I cringe when I think about using this thing on electronics. I left this one behind when I moved to America, and apparently my sister actually used it fairly recently. Fortunately, she was just joining cables. The third Once I got to America, this was the first soldering iron I got. It is a billion times better than the previous ones, because it’s temperature controlled. I used this soldering iron for quite a long time, but it’s pretty slow, and the tips that come with it aren’t great. Also, I don’t think it’s actually ESD safe, and the temperature control isn’t even graded in C/F. The fourth When I needed a hot-air station, I ended up buying this thing: The soldering iron that comes with it is digitally controlled and heats up faster than the velleman, and it comes with better tips. The handle is also thinner and easier to hold. This particular unit doesn’t seem to be available anymore, but there are lots of similar ones, and I think they are pretty good for the money. The fifth I expect this to be the last soldering iron I ever buy. It’s not cheap, but it has a wide selection of tips, heats up fast, it’s ESD safe and has a great standby feature. In addition, the tips integrate the heating element, so if anything ever goes wrong, you just replace the tip and it’s like a whole new iron. The ones I almost bought There is a bunch of TS100-like soldering irons. These are simple open-source digital soldering irons which are small lightweight and relatively cheap. I don’t know how good they are obviously, but some people like them a lot. FX888 is one of the most recommended soldering irons out there. Only reason I didn’t buy it is because I was mesmerized by the T15 tips used by the FX951. This is a fairly cheap iron that takes hakko T12 tips. Since the tips does most of the work, you would basically ge…