# Adding vibrating motors

**URL:** <https://crucible.hubbe.net/t/adding-vibrating-motors/7070>\
**Category:** Off-topic\
**Created:** [July 14, 2025, 9:37pm UTC](https://crucible.hubbe.net/t/adding-vibrating-motors/7070 "2025-07-14T21:37:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bethany](https://crucible.hubbe.net/letter_avatar_proxy/v4/letter/b/5f9b8f/32.png) [@bethany](https://crucible.hubbe.net/u/bethany)\
**Post date:** [July 14, 2025, 9:37pm UTC](https://crucible.hubbe.net/t/adding-vibrating-motors/7070/1 "2025-07-14T21:37:57Z")

</div>

Hello, I’m planning on adding two vibrating motors to my saber. I have no clue where the motors should be wired to and need advice, the website I got them from says they have a 2-3.6v operating range with a current rating of 60mA max. And what script am I supposed to add the haptics in to.

---

<div class="post-metadata">

**Author:** ![profezzorn](https://crucible.hubbe.net/user_avatar/crucible.hubbe.net/profezzorn/32/8_2.png) [@profezzorn](https://crucible.hubbe.net/u/profezzorn)\
**Post date:** [July 14, 2025, 9:52pm UTC](https://crucible.hubbe.net/t/adding-vibrating-motors/7070/2 "2025-07-14T21:52:35Z")

</div>

Motors are wired exactly like a LED, and controlled by styles, exactly like a LED.  
60mA @ 3.6v volts means that you’ll need a resistor, which should be ((4.2-3.6)/0.06\_ = 10 ohms or more.